Description
Dell inspiron 7391 screen
Dell inspiron 7391 screen
Replacing the touch and LCD display on a Dell Inspiron 7391 laptop is a detailed process that requires care and proper tools. Below is a step-by-step guide to help you through the replacement.
Tools and Materials Needed
Screwdrivers: Phillips #0 or #1 screwdriver
Plastic prying tools: To avoid damaging case components
Tweezers: For handling small connectors
Suction cup (optional): Useful for lifting screens without damage
Replacement LCD + Touchscreen assembly
Step-by-Step Replacement Process
1. Preparation:
Turn off your laptop completely.
Disconnect it from any power source by removing the AC adapter.
Remove any attached peripherals (USB devices, external monitors, etc.).
2. Remove Battery (if applicable):
If your model has a removable battery, take it out for safety.
3. Remove Back Cover:
Use a Phillips screwdriver to remove all screws securing the back cover of the laptop.
Carefully use plastic prying tools to detach the back cover from the chassis; be gentle to avoid breaking any clips.
4. Disconnect Battery/Power:
Locate and gently disconnect any battery cables or power connectors if applicable in order to prevent accidental shorts during repairs.
5. Remove Screen Assembly:
Unscrew any screws that secure the LCD/touchscreen assembly; these may be located near where it connects to hinges.
Gently lift up on the screen assembly using suction cups or plastic prying tools while being cautious with connected cables leading towards motherboard.
6. Detach Display Cables:
Carefully disconnect all display including touch digitizer connectors attached at either side of display unit as well as main LCD cable carefully pulled off without damaging pins or connectors.
7. Install New Touch + LCD Assembly:
– Position your new touchscreen/LCD assembly into place, ensuring correct alignment of screw holes and connector slots.
– Reconnect all necessary cables securely but gently; ensure they are properly seated but do not force connections which could lead damage pin connectors or ports.
8. Secure Display Assembly:
– Fasten screws back into their respective locations around hinges for stability once everything is connected correctly.
Reattach Back Cover & Power Up Device:
– Place back cover onto its position over chassis while aligning it correctly.
– Screw down all covers you previously removed securely again ensuring no loose connections remain before closing up device completely .
####10 Testing Functionality:
Once powered on , visually check if both touch screen functionality work alongside regular lcd features before finalizing closure .
Important Notes:
It’s crucial always handle internal components delicately—static electricity can harm sensitive electronics so consider using an anti-static wrist strap while performing internal work within laptops .
Remember that if you’re
Reviews
There are no reviews yet.