Description
Mecer WPTU UPS 2KVA
Mecer WPTU UPS 2KVA
- Capacity: 2000VA / 1600W
- Frequency Range: 40 Hz ~ 70 Hz
- Battery Type: 12V/9Ah
- Pure Sinewave
- Power Input Cable Not Included
- Phase Single phase with ground
- Capacity 2000 VA / 1600 W
- Input Voltage Range Low Line Transfer 160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5% (Ambient Temp. < 35°C) (based on load percentage 100% – 80% / 80% – 70% / 70-60 % / 60% – 0)
- Low Line Comeback 175 VAC / 155 VAC / 135 VAC / 125 VAC ± 5% (Ambient Temp. <35°C) (based on load percentage 100% – 80% / 80% – 70% / 70 60% / 60% – 0)
- High Line Transfer 300 VAC ± 5%
- High Line Comeback 290 VAC ± 5%
- Frequency Range 40HZ ~ 70 HZ
- Power Factor ? 0.99 @ nominal voltage
- Output Output Voltage 200/208/220/230/240 VAC
- AC Voltage Regulation (Batt. Mode) ± 1%
- Frequency Range (Synchronized Range) 47 ~ 53 Hz or 57 ~ 63 Hz
- Frequency Range (Batt. Mode) 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz
- Current Crest Ratio 3:1 Harmonic Distortion ? 3 % THD (Linear Load), ? 6 % THD (non-linear load)
- Transfer Time AC Mode to Batt. Mode Zero
- Inverter to Bypass 4 ms (Typical)
- Waveform (Batt. Mode) Pure Sinewave
- Efficiency AC Mode 89%
- Battery Mode 87%
- Battery Battery Type 12 V 9 Ah
- Numbers 4 Typical Recharge Time 4 hours to recover to 90% capacity
- Charging Current (max.) 1.0 A
- Charging Voltage 54.7 VDC ± 1%
- Indicators LCD Panel UPS status, Load level, Battery level, Input/output Voltage, Discharge timer and Fault Conditions
- Alarm Battery Mode Sounding every 4 seconds
- Low Battery Sounding every second
- Overload Sounding twice every second
- Fault Continuously sounding
- Physical Dimension, D x W x H (mm) 397 x 145 x 220
- Net Weight (kgs) 17
- Environment Humidity 20-90 % RH @ 0-40°C (non-condensing)
- Noise Level Less than 50dB @ 1 Meter
- Management Smart RS-232/USB Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7/8, Linux, Unix and Mac
Reviews
There are no reviews yet.